Divine Marine designs, installs, and commissions complete Victron Energy power systems for yachts, sailboats, trawlers, and sportfishing boats across Puget Sound and the Pacific Northwest. Lithium house banks, inverter chargers, solar, and full VRM monitoring, engineered and installed by a certified marine team.
"Divine Marine replaced our old AGM bank with a Victron lithium and MultiPlus setup. The install is clean, the VRM monitoring is incredible, and we finally have power for days on the hook."
"They engineered the whole system before touching a wire. Cerbo GX, Orion DC-DC, the works. Best marine electrical shop on Lake Washington, hands down."
"Professional, knowledgeable, and they actually explained how everything works. Our trawler runs the AC off the inverter now without firing up the genset."
Certified Victron Energy Installation
Victron Energy builds some of the most reliable and intelligent power equipment on the water, but the performance of any system comes down to how it is designed and installed. Divine Marine has been wiring and commissioning marine electrical systems in the Seattle area since 2009, and we build every Victron installation to ABYC standards from the battery terminals up.
Whether you are upgrading to a lithium house bank, adding solar for off-grid anchoring, or replacing an aging inverter charger, we handle the full project: load analysis, system design, equipment selection, installation, and VRM remote monitoring setup. You get one accountable team and a power system that performs exactly the way it was engineered to.
Start Your ProjectWhat We Install
From a single inverter swap to a fully integrated lithium power platform, we design and install every component to work together as one system.
Victron MultiPlus and Quattro inverter chargers sized to run your AC loads, manage shore power, and charge your bank automatically. Clean sine wave power throughout the boat.
Lithium battery systems with proper BMS integration, fusing, and protection. More usable capacity and faster charging in a fraction of the weight of lead acid.
SmartSolar MPPT charge controllers and marine solar arrays that keep your batteries topped off at anchor. Quiet, fuel-free power that extends your time off the dock.
Cerbo GX, GX Touch displays, and the Victron VRM portal so you can see and control your entire system from the helm or your phone, anywhere in the world.
Orion-Tr Smart DC-DC chargers to safely charge lithium banks from your engine alternator while protecting the alternator from overload. Ideal for cruising boats.
Galvanic isolators, isolation transformers, and properly configured shore power so your boat charges safely and stays protected from dock corrosion and ground faults.
Why Boat Owners Choose Us
Every system starts with a load analysis and a wiring diagram, so you know what you are getting and why before any work begins.
Correct wire gauge, marine-grade terminals, proper fusing, and clean cable runs. Work that passes survey and lasts in the salt air.
We configure VE.Bus, DVCC, and VRM the right way so your inverter, batteries, solar, and charging all communicate as one integrated system.
We are based in the Kirkland and Seattle area and service boats throughout Lake Washington, Lake Union, and Puget Sound. Real local support after the install.
We commission your VRM portal so you can watch state of charge, solar yield, and system alarms from anywhere, and so can we when you need help.
Electronics, audio, fiberglass, and detailing under one roof. Your electrical project can be coordinated with any other work your boat needs.
Our Work
A look at real Victron Energy systems designed, wired, and commissioned by Divine Marine aboard Pacific Northwest boats.
How It Works
A clear, five-step process that takes your project from first conversation to a fully commissioned system.
We review your boat, your power goals, and how you use it on the water.
Load analysis, equipment selection, and a wiring diagram with a written quote.
Clean, ABYC-standard installation by our certified marine electrical team.
System configuration, testing, and VRM monitoring setup before handover.
Ongoing local service and remote monitoring whenever you need us.
Equipment We Install
We are equipped to design, supply, and install the complete Victron Energy product range for marine applications.
Vessels We Serve
We install and service Victron Energy systems across the full range of pleasure and cruising boats in the Pacific Northwest.
Common Questions
Yes. Divine Marine is a certified Victron Energy installer with deep experience designing and commissioning Victron systems for marine use. We do not just sell the equipment, we engineer the full system and configure it correctly using VE.Bus, DVCC, and the VRM portal.
The right bank size depends on your loads and how you use the boat. We start with a load analysis that looks at your refrigeration, electronics, inverter loads, and how long you want to stay off shore power. From there we recommend a bank, charging sources, and inverter sizing that match the way you actually cruise.
Yes. We install Victron Energy systems on sailboats, motor yachts, trawlers, sportfishers, catamarans, and liveaboards. Each platform has different space, charging, and load requirements, and we design the system to fit your specific vessel.
Yes. With a Cerbo GX and the Victron VRM portal you can see state of charge, solar production, inverter status, and system alarms from anywhere in the world. We set up your VRM account during commissioning and show you how to use it, and we can monitor it remotely to help with support.
A straightforward inverter or monitor upgrade can be completed in a day or two. A full lithium house bank with inverter charger, solar, DC-DC charging, and monitoring is a larger project, often several days to a couple of weeks depending on the vessel and access. We give you a clear timeline with your written quote.
We are based in the Kirkland and Seattle area and primarily serve Lake Washington, Lake Union, and Puget Sound. For larger projects and cruising boats we can discuss travel beyond the immediate area. Contact us with your location and we will let you know how we can help.
In many cases, yes. We can integrate Victron inverter chargers, solar, and monitoring into a healthy existing electrical system. If the existing wiring or distribution is undersized or unsafe, we will tell you up front and recommend what needs to be addressed so the new system performs and stays safe.
Talk to Seattle's Victron Energy marine installation team. We will review your boat, your goals, and design a power system built to last in the Pacific Northwest.
